Additional Arm Mount

• Dimension: LWH 8" x .75" x 0.03"
• Weight: 2oz

• 1 Arm Mount
• 1 Alcohol wipe
• 1 Primer ampule
• 1 Parking tab
• 4 Pieces laptop rubber feet

Can you attach two laptops to one LapLok?

Absolutely! You can securely fasten two devices simultaneously on one LapLok by inserting both Arm Mounts into the mouth of your LapLok. However, we recommend you do not attach more than two laptops to one Laplok to prevent damage to the LapLok or your device.

Can I reuse my arm mount to another device?

No, the Arm Mount is designed for one-time use only. Once removed from your laptop, its attaching capacity will diminish, leaving your device vulnerable to grab-and-go theft.

Where should the Arm Mount be positioned on the laptop?

The Arm Mount should be positioned flat on the bottom of the laptop, avoiding any bumps, ridges, vents, or compartments. It should not extend beyond the edge of the laptop. If unsure, it's recommended to test the placement by taping it on first.

Is the LapLok and Arm Mount suitable for individuals who are right-handed?

Yes, the LapLok and Arm Mount are suitable for right-handed individuals. It is advised to position the Mounting Plate and Arm Mount on the lower left side on the bottom of the laptop for easy accessibility from the side.

How do I install the Arm Mount, Parking Tab, and Laptop Rubber Feet?

• Select a suitable location on the bottom of your laptop for attaching the Arm Mount, ensuring ease of rotation for the 8” Mounting Arm to connect to your LapLok. Ensure that both the Mounting Plate and Arm lay flat on the laptop surface, avoiding any protrusions or vents. Do not place them beyond the laptop's edge. If uncertain, conduct a test by temporarily taping them in place.
• Clean the chosen location on the laptop using the provided Alcohol Wipe.
• Activate the Primer Ampule by squeezing or bending it until the inner glass breaks. Apply the primer to the designated area for Arm Mount installation and allow it to dry for 30 seconds.
• Remove the paper backing from the Arm Mount and firmly affix it to the primed area on the laptop. Press down firmly for 30 seconds and allow 24 hours for the adhesive to dry completely. Full curing takes approximately 3 days.
• Identify the position for the Parking Tab to secure the end of the 8” Arm Mount. Clean the area with the Alcohol Wipe, apply the Primer, and allow it to dry. Remove the paper tape from the Parking Tab and glue it onto the laptop to prevent rotation when not in use. Press down firmly to ensure secure attachment.
• For installation of the provided Rubber Feet, clean the four corners of the laptop using the Alcohol Wipe and apply the Primer. Remove the paper backing from the Rubber Feet stickers and firmly press them onto the corners for 30 seconds.
• While the attached components are drying, it is recommended to affix the LapLok Warning Sticker as a theft deterrent to the lower right or left-hand corner of your laptop.

How do I remove the Arm Mount from my device

To detach the Arm Mount, utilize a butter knife, single-edge razor blade, or a similar tool as a lever to carefully lift them off. This design is implemented to deter theft. Apply the same method to remove the Parking Tab.

Can I replace my Arm Mount replacement or receive a refund?

The Arm Mount is non-refundable since this is a one-time use only product. The arm mount is designed to adhere to one device only and cannot be transferred to another device after use. Once removed from your laptop, its attaching capacity will diminish, leaving your device vulnerable to grab-and-go theft.

Customer Support

How can I contact your customer service?

You can get in touch with us regarding any matters related to your TechLok product through the following channels:

• Hotline: 1-855-552-7565
• Customer Support: contact-us@laplok.com
• Returns and Replacements: returns@laplok.com
• Technical Support: technicalsupport@laplok.com